When the ninth edition of the Florida Building Code takes effect on December 31, 2026, roofing systems installed on lightweight concrete over steel decks must meet the testing requirements in TAS 114, Appendix J. Miami-Dade Product Control says manufacturers must update affected Notices of Acceptance (NOAs), the county documents that describe approved installations, if the system qualified solely through a 2 ft by 2 ft test of how it resists being lifted by wind. The memo addresses approvals for this specific roof construction and gives owners no deadline to replace an existing roof. Apex Roofing Solutions Corp. offers a free roof inspection and puts the price and every fee in writing before work starts. For home roof replacements, payments after the signing deposit follow permit approval and the two city inspections.
Key takeaways
- December 31, 2026 is the effective date of the ninth edition of the Florida Building Code.
- Miami-Dade Product Control says a 2 ft by 2 ft uplift test alone will no longer satisfy the requirement for systems installed on lightweight concrete over steel.
- The county treats LW/metal deck composite as a metal deck for TAS 114, Appendix J testing.
- The January 15 Product Control memo directs manufacturers to update affected NOAs. It gives owners no deadline to replace an existing roof.
How can I tell if my flat roof has this kind of deck?
Start with the drawings or paperwork from the last roof job, if you have them. Ask your roofer to point out where the records identify lightweight concrete over steel. The deck is the part of the roof structure that supports the layers above it. A roof can look flat from the street and still leave you with no answer about what is underneath.
Look for the words “lightweight concrete over steel deck” or the abbreviation “LW/metal deck composite.” Miami-Dade Product Control says it treats that composite as a metal deck system for this testing requirement. If your records only name the roof covering, show them to your roofer and ask what else they need to identify the deck.
If you have a flat section over an addition and a different roof over the rest of the house, ask which roof area the contractor is pricing and what deck they identified there. That gives you a way to check that the approval they show you is for the area where the work will happen.
Why is the old 2 ft by 2 ft test no longer enough on its own?
Miami-Dade Product Control’s January 15 memo says the ninth edition requires testing under TAS 114, Appendix J for roofing systems installed on lightweight concrete over steel decks. The county’s Product Approval Notices page explains that this follows a change in how the county classifies the combination of lightweight concrete and steel.
The earlier 2 ft by 2 ft test measured uplift, which is the force that can pull roofing upward in strong wind. For a system that qualified solely through that test, the manufacturer must update its NOA to demonstrate that it meets Appendix J. Ask your roofer which approval covers the proposed installation and where it lists your deck construction. If the roofer is waiting for a revision, ask when they expect to have an approval they can show you.
What should I ask for if my roof quote carries into 2027?
Ask your roofer which code edition the permitting office will use for your job. If the ninth edition applies and you have lightweight concrete over steel, ask for the NOA number and a copy of the approval that covers the proposed roof system on your deck. The county memo gives the code’s effective date. For a permit already in progress, confirm which edition applies with the office reviewing it.
If two proposals name the same roof covering, ask each contractor to point to the installation described in their approval. Then ask each to show you the corresponding work in the written scope. If a contractor changes the proposed system while waiting for an approval, ask for the replacement approval and a revised written price before you agree. That lets you see what changed and whether the new total covers the same area.
What if my roof is leaking while I sort out the approval?
Book a free roof inspection if you already have a leak. Apex schedules repair inspections the same day or next day. We look at the leak from inside and get on the roof to photograph what we find. We show you the photos and explain which findings need work and which are cosmetic.
If a repair makes sense for the condition of the roof and the service life it has left, we quote the repair in writing. If the condition points to replacement, ask us to show you which findings led to that recommendation. The county’s memo addresses testing and approval paperwork. Your roof inspection gives you the information you need to decide what work to pay for.
How does Apex price the work once the deck is identified?
Apex prices flat and low slope commercial work, including TPO, by the project after inspecting the roof and assessing what the building needs. You get a written scope and price. The contract spells out the fees and payment terms before work starts. If you are worried the bill could grow after work starts, ask us to walk you through the scope and explain how the contract prices any work that depends on what we find underneath.
For an Apex home roof replacement, you pay $500 at signing. Of the remaining balance, 35% is due when the city approves the permit, 35% when the in-progress inspection passes and 30% when the final inspection passes. Where wood deck replacement is part of the home roof contract, rotten wood is priced per sheet and charged only for what is replaced. If you want financing, the quote shows the monthly payment.
Call 305-290-2482 to book a free roof inspection. If you have a drawing, an old approval or a current proposal, have it handy so we can review what it says about the deck and the work you’re considering.
Questions homeowners ask
Does every flat roof in Miami-Dade fall under this update?
Miami-Dade Product Control ties this update to what is under the roof covering. Ask your roofer to identify whether your roof has lightweight concrete over a steel deck.
Do I have to replace my existing roof by December 31?
The January 15 Miami-Dade Product Control memo directs manufacturers to update affected approvals. It gives no replacement deadline for owners. If you have a leak or are planning work, an inspection can help you decide whether repair or replacement makes sense.
What if the proposed approval says LW/metal deck composite?
Miami-Dade Product Control treats that description as a metal deck system for TAS 114, Appendix J testing. Ask your roofer to show you the approval for the specific installation in your proposal and explain how it meets the testing requirement.
What does Apex charge to inspect and price this roof?
The inspection is free. Apex prices repairs in writing after the inspection. Commercial roofing, including TPO, is priced by the project, with the work and payment terms spelled out in writing.
