South Florida Roofing News

What Does Miami-Dade’s Tile Underlayment Approval Rule Mean for My Re-Roof Permit?

Updated November 18, 2026 Reviewed by Brandon Vega, owner, Apex Roofing Solutions Corp. (license CCC1336242)
Concrete roof tiles staged over self-adhering underlayment during a tile roof replacement
Photo: Apex Roofing Solutions

Miami-Dade Product Control says the 9th Edition of the Florida Building Code takes effect December 31, 2026 and requires product approval for underlayment, the layer beneath the tiles. Under the new code, underlayment approved for use beneath tile must demonstrate resistance to the applicable upward wind pressure under ASCE 7 or Roofing Application Standard 127. Miami-Dade Product Control says existing Notices of Acceptance (NOAs), which are county product approvals, remain valid. For permit applications submitted on or after January 1, 2027, your roofer may install underlayment beneath tile only within the approved uses and applicable wind uplift resistance shown in the current product approval or NOA. At Apex Roofing Solutions Corp., we offer a free roof inspection and put every price and fee in writing. After the deposit, we tie payments to permit approval and passed city inspections.

Key takeaways

  • Miami-Dade Product Control says the code takes effect December 31, 2026. The notice gives January 1, 2027 as the start date for its permit application instructions.
  • Miami-Dade Product Control says the new code drops the old yellow stripe allowance. Underlayment beneath roof tile needs product approval for that use.
  • The Product Control notice says existing NOAs remain valid. Ask to see where the current approval shows the approved use and wind uplift resistance.
  • Roofing Application Standard 127 helps work out how much upward wind pressure the underlayment on your roof must resist.

Which permit application date puts my roof under this rule?

Ask your roofer when the permit application was submitted. The county's tile underlayment instructions apply to applications submitted on or after January 1, 2027. Miami-Dade Product Control's July 31 notice also gives the effective date for the 9th Edition of the Florida Building Code as December 31, 2026.

Let's say you sign a tile replacement contract in December and your roofer submits the permit application in January. The application falls under the notice's January 1 instructions. If the application goes in during December and the job carries into January, give your permitting office the submission date and ask which requirements it will review. If you file on December 31, ask the office directly. That's the date the code takes effect, and the notice gives January 1 as the start date for its application instructions.

Can my roofer still use yellow stripe underlayment?

Ask to see the product approval for the exact underlayment your roofer named. Miami-Dade Product Control says the new code drops the old allowance for yellow stripe underlayment that qualified under a method in the previous code. The new code requires every underlayment intended for use beneath roof tile to have product approval for that use.

Product Control says existing NOAs remain valid. An NOA is a Miami-Dade Notice of Acceptance, the county's product approval document. For applications submitted on or after January 1, your roofer can use the underlayment beneath tile only within the uses and wind uplift resistance shown in the current approval. If someone gives you an NOA number, ask them to show you the page that covers the approved use and the resistance for the way they plan to install it.

How do I check the approval against the wind pressure on my roof?

Ask your roofer to put two figures in front of you. The first is your roof's design wind uplift pressure, which is the upward pull the roof is designed to withstand. The second is the underlayment's approved uplift resistance for the way your roofer plans to install it. That resistance has to meet the applicable design pressure.

Miami-Dade Product Control points to the ASCE 7 wind design standard or Roofing Application Standard 127, known as RAS 127. The Florida Roofing and Sheet Metal Contractors Association's April 2026 preview shows how the revised RAS 127 uses factors such as roof shape and slope to work out the pressure the underlayment has to meet. Height and wind exposure also factor into that pressure. The association said the revisions it described could change before final adoption. In that preview, no additional signed and sealed engineering design calculation is required when the design wind uplift pressures are determined from the applicable RAS 127 tables. Those tables cover a wind speed of 175 mph and Risk Category II buildings with gable or hip roofs in Exposure Category C or D. Under the version described in the preview, a professional engineer or registered architect must prepare calculations outside the standard's scope. That professional must also sign and seal them.

The association's April 2026 preview also points to Section 1523.6.5.2.1. As described in the preview, that section calls for the product approval for underlayment beneath individual roof tiles to include the tested uplift resistance. Ask your roofer to show you the approved installation and explain how the resistance on that page compares with the pressure for your roof.

How do I compare tile bids that name different underlayments?

Start with the exact product name on each bid and the approval each roofer plans to use for your permit. Have each roofer show you where the approval covers use beneath tile and what uplift resistance it gives for the way they plan to install it. Once you can see how each product fits your roof, ask each roofer to explain the difference in price.

We put the underlayment name in our proposal so you can match it to the product we plan to install. We also list the permit fees and the unit prices for any wood replacement. If the product changes during permit review, ask for the new product's name and approval. Have the roofer show you how it meets your roof's design pressure. Ask for any price change in writing before installation. If you'd like to go over a tile replacement for your home, book a free roof inspection with Apex.

How does Apex price my tile roof and when do I pay through final inspection?

We get on your roof before we price your tile replacement. We show you photos of your roof and walk you through what needs fixing. We name the underlayment and list the permit fees in your written price. We handle the permit and both city inspections. When the job is complete, we give you a 10-year workmanship warranty in writing.

If you're worried the price will go up when the tiles come off, look at the wood prices in the contract before you sign. The wood deck is the base under the roofing. The contract gives you a price per sheet for deck wood and a price per foot for fascia and soffit. We charge only for what we replace. If you want financing, we show the monthly payment on the quote. Your quoted price holds for 30 days.

You pay a $500 deposit when you sign. You pay 35% of the remaining balance when the city approves the permit. The next 35% is due after the in-progress inspection passes. You pay the last 30% after the final inspection passes. If you'd like us to look at your roof, call Apex at 305-290-2482 to book a free roof inspection.

Questions homeowners ask

Does the tile approval also cover the underlayment?

Ask your roofer to show you the approval for the exact underlayment. Miami-Dade Product Control says underlayment intended for use beneath roof tile needs product approval. The document should show that the product is approved for use beneath tile and how much wind uplift it can resist for the proposed installation.

Can I use the same underlayment my neighbor used?

It may fit your roof. Ask your roofer to compare the current approval with your roof's design requirements and the way they plan to install it. Roofing Application Standard 127 takes factors such as roof shape and slope into account. It also considers height and wind exposure. Ask your roofer to show you the figures for your house.

Does this rule mean I have to replace my tile roof now?

Miami-Dade Product Control's notice covers how underlayment may be installed for tile roof work when the permit application is submitted on or after January 1, 2027. If you're trying to figure out whether your roof needs work in the first place, we'll get on the roof, take photos and show you what needs fixing and what's cosmetic.

What do I pay Apex when the city approves my tile roof permit?

When the city approves the permit, you pay 35% of the balance left after the $500 deposit you pay at signing. Then 35% is due after the in-progress inspection passes. The final 30% is due after the final inspection passes. You can find the permit fees and the unit prices for any wood replacement in your contract.

Sources

Free Estimate

Tell Us About Your Roof

Share a few details and our team will follow up with the next step.

  • Roof repairs, replacements, and inspections
  • Tile, shingle, metal, and commercial roofing
  • Serving Miami-Dade, Broward, Palm Beach and Monroe counties

Prefer to talk to a person?

Call now if you need help today.

305-290-2482