Yes, you need HOA approval to replace your roof in Florida if the declaration of covenants or the published standards it authorizes specifically say or reasonably imply that the HOA can review and approve the type or appearance of the roof you want. Florida Statutes section 720.3035 (2026) limits what the HOA can review. It protects the material choices listed in those documents. It also bars the HOA from requiring an issued building permit before reviewing your application. This guide covers homeowners associations under Chapter 720. If you own a condo, check your condo's own documents. At Apex Roofing Solutions Corp., we offer a free inspection in Miami-Dade and Broward. We put the price and every fee in writing. After the deposit, payments are tied to permit approval and passed city inspections.
Key takeaways
- Section 720.3035(1)(a) limits HOA roof review to authority the declaration or its authorized published standards specifically state or reasonably imply. The HOA must apply and enforce those standards reasonably and equitably.
- Section 720.3035(1)(c) bars your HOA from making you get an issued building permit before it reviews your roof application.
- Section 720.3035(2) protects your right to pick a material from the options in your declaration or the published standards it authorizes.
- Section 720.3035(4)(a) requires the HOA to give you a denial in writing. It must name the specific rule and the specific part of your project that fails to meet it.
- Section 720.3035(6) covers roof systems the Florida Building Code recognizes that meet ASCE 7-22 standards. Before you pick a product to submit, ask for the hurricane protection specifications your HOA adopted.
Where do I look to see if my HOA reviews roof replacements?
Start with your declaration of covenants and the published architectural guidelines or standards it authorizes. Under section 720.3035(1)(a), the HOA or its committee may review and approve plans or enforce exterior appearance standards only where those documents specifically say or reasonably imply that it has authority over the location, size, type or appearance at issue.
Ask the association for the declaration and the architectural guidelines it uses to review roofs. Then ask it to show you the language that applies to your project. If you're taking off concrete tile and putting concrete tile back on, say that and ask whether a matching replacement needs an application. If you're going from tile to standing seam metal, ask which language covers the change in material and appearance.
Read the roof section alongside the general rules for review. The declaration may tell you what the committee can review. The published guidelines it authorizes may tell you which roof features the committee checks. Keep those pages with your application so you can go back to the same language if the HOA asks you to change the proposal.
Section 720.3035(1)(a) also requires the HOA or committee to apply and enforce authorized standards reasonably and equitably for all parcel owners. If you're unsure how a standard applies to your roof, ask the association to walk you through how it applied that standard to the product you proposed.
Can my HOA tell me which roof material or color to use?
If your declaration or the published standards it authorizes give you material or design choices, the HOA and its committee must let you pick from those choices under section 720.3035(2). The HOA can review the type or appearance of your roof to the extent that section 720.3035(1)(a) allows under those documents.
Let's say the guidelines for your home list two concrete tile profiles. The profile is the shape of the tile you see on the roof. Read both descriptions and check for any conditions on finish or color. When you pick one, write the profile and color on the application and attach the product sheet that shows both. That gives the reviewer something specific to check against the written options.
If the association asks you to use a different tile, ask which part of your choice falls outside the listed option. For example, the product sheet might show the right shape but a different color from what you put on the application. Once you know what's off, you can correct the paperwork or ask your roofer for a different selection.
Section 720.3035(5) also bars the HOA or its committee from enforcing a policy or restriction that conflicts with the owner's rights and privileges in the declaration or the published standards it authorizes. That applies even if the policy is enforced uniformly. If a separate policy appears to narrow a choice you found in those documents, ask the association to show you in writing which language controls.
Can I send in my roof application before the building permit is issued?
Yes. You can send the proposed roof details to your HOA while the permit is still pending. Under section 720.3035(1)(c), a homeowners association or its committee cannot make you get a government-issued building permit before it reviews construction of a structure or improvement on your parcel.
If the form asks for a permit number and the permit is still pending, tell the association where things stand. Ask how it wants you to send in the form for review. If the manager tells you to come back once the permit is issued, ask the association to review your proposal under section 720.3035(1)(c). Keep a copy of what you sent and the written response.
Give your roofer a copy of the product details you sent in. If a different product shows up later in the proposal or the permit paperwork, ask your roofer what changed. Then check with the association on how to update your application. Give them the product name. Include the profile and color so everyone knows which roof you're talking about.
At Apex, we handle the permit and both city inspections for our residential roof replacements. Keep the association's decision with your roof records. As the job moves along, ask us where the permit and inspections stand. Those records give you the dates you need to check your payment schedule.
When does the hurricane protection rule cover my roof?
Under section 720.3035(6)(c), hurricane protection includes roof systems that the Florida Building Code recognizes and that meet ASCE 7-22 standards. If your proposed roof fits that definition, ask the association for the hurricane protection specifications it adopted. Then ask your roofer to show you how the proposed system meets them.
Section 720.3035(6)(a) applies to every homeowners association in the state, regardless of when the community was created. The board or appropriate committee must adopt hurricane protection specifications for each structure or other improvement on a parcel it governs. Those specifications may cover product color and style. They may also cover other factors the board considers relevant. Every specification the board adopts must comply with the applicable building code.
Under section 720.3035(6)(b), even if other provisions in the HOA's governing documents say otherwise, the board or committee cannot deny an application to install, enhance or replace hurricane protection if it meets the adopted specifications. That same paragraph lets the board or committee require the exterior of the structure or improvement to follow an existing unified building scheme, meaning a common design for how the outside looks.
Ask your roofer to name the full roof system in the proposal. Then ask the association which adopted specifications and exterior appearance requirements it'll check that system against. If a specification calls for a particular color or style, have your roofer point to that detail in the proposed product documents. Keep those documents and the matching specifications with your application.
What does my HOA have to put in a roof denial letter?
If your HOA or its committee denies an application for a structure or improvement on your parcel, it must give you written notice under section 720.3035(4)(a). The notice has to name the specific rule or covenant it relied on. It also has to point to the specific part of your proposal that fails to meet it.
If you get a phone call saying the roof was denied, ask for the written notice. If the notice only says the roof fails an architectural standard, ask which provision applies. Then ask which part of your proposal falls short and compare the answer with the product sheet you sent in. For example, if the letter points to the tile profile, have your roofer show you that profile on the product sheet so you can see exactly what the HOA reviewed.
Section 720.3035(4)(a) also says the association or committee may not unreasonably infringe on or impair the architectural rights and privileges in the declaration or the published standards it authorizes. Under section 720.3035(4)(b), if the association or committee acted unreasonably, knowingly and willfully, an affected owner is entitled to recover damages caused by the infringement or impairment. That includes costs and reasonable attorney fees incurred to preserve or restore those rights.
Keep the original application with the product details and the written decision. If you change the product or color and send the application back in, keep the revised version with its own product sheet. That way, you can tell which version each response is about.
What are the four steps to apply for a roof replacement?
1. Request the declaration and the architectural guidelines. Let's say you have concrete tile and want to see if you can change the tile profile. Ask the association for the roof rules that apply to your home and a copy of its current application. If you're proposing a roof under the hurricane protection provision, ask for the adopted specifications under section 720.3035(6).
2. Send in the application with the product details. For that tile replacement, write the proposed product name on the application. Add the profile and color. Attach the product sheet that shows the same selection. Include the supporting roof system details that apply to your request. Keep a copy so you can check any change the association or your roofer proposes later.
3. Get the decision in writing. If the association approves your application, keep the response with your product sheet. If it denies the application, ask for the written notice required by section 720.3035(4)(a). Check that it names the specific rule and points to the specific part of your proposal it says fails to meet that rule. Use that language when you discuss a revised selection.
4. Book a free inspection. Bring the HOA documents and product details to the appointment, along with any written decision. At Apex, we get on the roof and show you photos of your own home. We'll walk you through what needs attention and what's cosmetic. If it makes sense to repair the roof you have, we'll quote the repair. If replacing it makes more sense, we can price up to three options side by side. Call 305-290-2482 to book the inspection.
How do I find out what my HOA roof choice will cost with Apex?
Ask us to price the roof you're planning to submit or the one your HOA already approved. As of 2026-11-11, we price residential replacements per job after the inspection. The price depends on the roof you have now and how complex your roof is. It also depends on the new system and underlayment you pick. Underlayment is the layer below the finished roof covering. We put the price and every fee in writing before we start work.
Check that the written proposal names the same visible roof product you sent to the HOA. It should show what goes underneath it too. On Apex replacements, we name the underlayment and identify the approved roof system. Even if two options look alike from the ground, you can use the proposal to see what work each one includes.
Also, check the contract for what you'll pay if wood needs replacing after the old roof comes off. The wood deck is the surface underneath that supports the roof system. In our contract, we list rotten deck wood by the sheet, as applicable. We list fascia, the board along the roof edge, by the foot as applicable. We also list soffit, the underside of the overhang, by the foot as applicable. You pay the written unit price for the wood we actually replace.
Under our residential terms as of 2026-11-11, you pay $500 when you sign. You pay 35% of the balance when the city approves the permit. You pay another 35% after the in-progress inspection passes. The last 30% is due after the final inspection passes. Those dollar amounts come from the written job price, which accounts for the roof you have now and the complexity of the work. It also accounts for the system and underlayment you choose. If you want financing, we'll show you the monthly amount on your quote.
Apex Roofing Solutions Corp. is a licensed and insured Florida Certified Roofing Contractor, license CCC1336242. We're based in Miami Lakes and serve Miami-Dade and Broward. Book a free inspection and bring your HOA's roof requirements so we can go over the proposed options with you before you commit.
Questions homeowners ask
Do I need to apply if my new roof looks like my old one?
Look for a replacement rule in your declaration and the published architectural standards it authorizes. Section 720.3035(1)(a) limits the HOA's review to what those documents specifically say or reasonably imply about the part of the project it is reviewing. Ask the HOA to tell you in writing how that language applies to the roof you want to put on.
Can I send in my roof application while the permit is pending?
Yes. Under section 720.3035(1)(c), the HOA or its committee cannot make you get a government-issued building permit before it reviews the proposed improvement. Ask the association for its application and send in the product details it asks for.
Can I pick a metal roof if my HOA lists it as an option?
Yes, under section 720.3035(2), you can choose a material listed in your declaration or in the published standards it authorizes. Before you submit the product you want, check whether the listing limits the metal profile, which is its shape. Check for any limits on the finish or color too.
When do I pay Apex for my residential roof replacement?
Under our residential terms as of 2026-11-11, you pay $500 when you sign. You pay 35% of the remaining balance when the city approves the permit. Another 35% is due after the in-progress inspection passes. The last 30% is due after the final inspection passes. Your balance depends on the roof you have now and how complex the work is. It also depends on the system and underlayment you choose. Underlayment is the layer below the finished roof covering. You'll see the permit fees in the contract, along with the unit prices for any wood that needs to be replaced.
