Budget about $9.75 to $11 per square foot of roof for an installed concrete tile replacement in Miami-Dade and Broward, based on going rates as of November 11, 2026. Use that range to plan your budget. Your quote depends on what goes under the tile, known as the underlayment. It also depends on the roof you have now, the system you choose and how complex your roof is. At Apex Roofing Solutions Corp., we offer a free roof inspection and put your price, fees and payment schedule in writing. We tie payments to permit approval and two city inspections. Check the contract for the permit fees and the unit prices for wood that needs replacement.
Key takeaways
- As of November 11, 2026, concrete tile runs $9.75 to $11 per square foot installed. Your quote depends on the underlayment and the roof you have now. It also depends on the system and how complex the roof is.
- One roofing square is 100 square feet of roof surface. For 24 squares, budget $23,400 to $26,400 installed. The final quote depends on the underlayment and your existing roof. The system and how complex the roof is also affect the quote.
- At Apex Roofing Solutions Corp., we put the wood rates per sheet or per foot in the contract. You pay for the amount we actually replace.
- Apex collects $500 when you sign. You pay 35% of the balance at permit approval. The next 35% is due after the in-progress inspection passes. The last 30% is due after the final inspection passes.
- Miami-Dade County's Product Control Section gives January 1, 2027 as the permit application date to check against its updated instructions for tile underlayment approvals.
What should I budget for concrete tile on an 18 or 24 square roof?
Eighteen squares would put your planning range at $17,550 to $19,800. At 24 squares, plan on $23,400 to $26,400. Both examples use the November 11, 2026 rate of $9.75 to $11 per square foot for installed concrete tile. One roofing square means 100 square feet of roof surface.
Let's say your proposal shows 18 squares. Take 1,800 square feet and multiply by $9.75 for the low end and by $11 for the high end. If a second proposal shows 24 squares for the same house, ask each contractor to show you which roof areas they counted. With different measurements, the totals tell you little about how each contractor priced the same work.
Use the measured surface of the sloped roof when you do the math. The living area on your home listing is the space inside the house. Ask if the roof measurement includes the garage and any covered patio you want reroofed. If a section uses a different roofing system, ask the contractor to identify it in the written scope.
Use these examples to plan your budget. The underlayment and the roof you have now can move the price. So can the system you choose and how complex your roof is. Once you have the proposal, check how it lists the permit fee and the wood replacement rates so you know how you'll be billed for each.
Why can two quotes for the same concrete tile have different prices?
First, look at what's going under the tile. Two bids can name the same tile and call for different underlayment, the layer that helps keep water from reaching the wood beneath it. Then compare how the bids handle removal of the roof you have now. Look at the system each contractor proposes. Check how each one handles the details of your roof shape.
Ask each contractor to point out the exact underlayment product on the proposal. Also ask what the proposal includes where roof surfaces meet. A valley, for example, is where two slopes meet to form a channel for rainwater. If one quote spells out that work and the other leaves it open, ask the second contractor what the written price covers in those spots.
At Apex, we start a full replacement by taking the old roof off down to the wood deck, which is the surface we build the new roof on. We name the underlayment and specify the roof system in the proposal. Ask for the Miami-Dade Notice of Acceptance, or NOA, which documents approved uses. Have the contractor show you where that approval covers the products and installation in your proposal.
Miami-Dade County's Product Control Section says that for permit applications submitted on or after January 1, 2027, the underlayment beneath roof tile must be installed according to the approved uses and applicable wind uplift resistance in the current product approval or NOA. Uplift is the force of wind pulling up on the roof. If your permit application could go in around that date, ask your roofer to name the underlayment and show you where the approval documents its use and uplift resistance.
What should my price cover from taking off the tile to cleaning up?
With an Apex concrete tile replacement, we take the existing roof off down to the wood deck. Then we install the new tile roof with the underlayment named in your proposal. We handle the permit and both city inspections. Check the permit fee in the contract to see how it figures into your total.
Ask the contractor to walk you through the job in the order it'll happen. Start with how the crew will remove the existing roof. Then ask which tile system they're installing and what goes underneath it. Before you finish, ask who handles the city inspections and when you'll get the written warranty. That gives you specific things to compare when two companies both quote a full replacement.
With Apex, the city permit takes about 2 to 4 weeks after signing. Then we set a firm installation date. Before we start installing, we cover the pool. We also cover the windows. We cover the garage as well. The crew cleans up every evening. If you have questions about getting in or out of your property during the work, ask when you review the scope.
When the job is complete, Apex gives you a written 10-year workmanship warranty. It covers our installation work under its terms. You also get the manufacturer warranty if the system has one. That warranty depends on the crew installing the system to the manufacturer's specifications. Before you sign, ask to see the warranty terms for the system you're considering.
How do I budget for wood replacement under the tile?
Check the unit prices before you sign. That way you can work out the charge once the crew knows how much wood needs to come out. At Apex, we write the rate per sheet or per foot into the contract and charge for the amount we actually replace. Some damage only shows up once the old roof comes off.
There are three parts to ask about. The deck is the wood surface under the roofing. The fascia is the board along the edge of the roof. The soffit is the underside of the roof overhang. Ask which part each rate covers, especially if the proposal puts all the work on one line for carpentry.
Let's say the crew replaces two sheets of decking. When you check the bill, you should be able to multiply two by the sheet price in your contract. If the crew replaces fascia too, ask how many feet they replaced and check that quantity against the rate per foot. Do the same for soffit so you can see how the contractor figured each charge.
Check those rates even if the roof looks tidy from the ground. The free inspection helps you see what's visible before you sign. The written unit prices let you check the bill for work the crew discovered after taking the roof off. Ask the contractor to show you where they replaced wood and match those spots to the quantities on your bill.
Should I get a price for another roof system before I choose tile?
Yes, if another system fits your home and the tile budget is tight. On November 11, 2026, the going rate per square foot installed was $6 to $7.50 for architectural shingle. Concrete tile was $9.75 to $11. For 24 gauge standing seam metal, the rate was $11 to $13. Each range depends on the underlayment and the roof you have now. The system and how complex the roof is also affect each range.
If you like the look of tile, start with a tile proposal so you can see what that price includes. If your quote comes in near the top of the planning range, ask what standing seam metal would cost on your roof. The tile range ends at $11 per square foot, which is where the metal range starts. Get both prices in writing using the same roof measurement so you can see the actual difference for your home.
At Apex, we inspect before we recommend replacing a roof. We get up on the roof. We take photos. We show you what needs attention and what's cosmetic. If a repair can solve the problem at a cost that makes sense for the useful life left in the roof, we'll put the repair in writing. If we recommend replacement, we can show you up to three suitable systems side by side.
You can book a free roof inspection to see if a repair makes sense for your home. The inspection can also help you decide whether to go with concrete tile replacement or another system. Ask us to use the same roof measurement and spell out the work for each replacement option so you can see what you'd get for the difference in price.
What do I pay on the tile contract before the crew arrives?
With Apex, you pay $500 when you sign and 35% of the remaining balance when the city approves the permit. You pay the next 35% of that same balance after the in-progress inspection passes. The last 30% is due after the final inspection passes. We put those amounts in the contract along with when each payment is due.
Let's say the signed contract total for a 24-square concrete tile roof is $25,000. Use that example amount to see how the payments work. After the $500 deposit, you'd have a $24,500 balance. You'd pay $8,575 when the city approves the permit. Another $8,575 would be due after the in-progress inspection passes. The final inspection payment would be $7,350.
If you're comparing monthly financing with paying directly, ask to see the monthly payment next to the written price. Apex shows the monthly payment on the quote, which holds for 30 days. While you have the quote in front of you, check the permit fee and the wood rates so you know what's set and what depends on how much wood the crew replaces.
At Apex Roofing Solutions Corp., we're based in Miami Lakes and serve Miami-Dade and Broward. We're licensed and insured as Florida Certified Roofing Contractor CCC1336242. Call 305-290-2482 to book a free roof inspection. We'll show you photos of your roof and put the work we recommend and its price in writing.
Questions homeowners ask
How much should I budget for 24 squares of concrete tile?
Plan on $23,400 to $26,400 for 24 squares, which is 2,400 square feet of roof. That uses an installed rate of $9.75 to $11 per square foot, based on going rates as of November 11, 2026. Your written quote depends on the underlayment and the roof you have now. The system you choose and how complex your roof is also affect the quote. Check the proposal for the permit fee and any wood that would be billed by the sheet or foot.
Can I use the square footage on my home listing to price my tile roof?
Ask your contractor for the measured roof area in squares. One roofing square is 100 square feet of roof surface. The square footage on your listing describes the house. We price the replacement using the roof surface the crew will cover.
Can Apex give me a repair option if only one part of my tile roof is leaking?
Yes. At Apex Roofing Solutions Corp., we inspect the roof and show you photos of what needs fixing. If a repair solves the problem and makes financial sense for the life left in your roof, we put the repair quote in writing.
How long is my Apex tile roof quote good for?
An Apex quote holds for 30 days. Look in your contract for the permit fee and the unit prices for any rotten decking, fascia or soffit that needs replacement. We charge for the amount we actually replace.
When do I pay Apex for a concrete tile roof replacement?
At Apex, we collect $500 at signing. Of the balance after that deposit, 35% is due when the city approves the permit. The next 35% is due after the in-progress inspection passes. The final 30% is due after the final inspection passes. If you want financing, we show you the monthly payment on the quote.
