For a 24 gauge standing seam metal roof in Miami-Dade and Broward, the going installed rate as of November 11, 2026, is $11 to $13 per square foot of roof. Use that range to plan your budget. Your quote depends on the roof you have now. It also depends on the metal system you choose. The underlayment and the shape of your roof affect it too. Apex Roofing Solutions Corp. offers a free roof inspection and gives you a written price that shows every fee. It also shows when payments are due based on city permit approval and inspections.
Key takeaways
- Use the November 11, 2026 going rate of $11 to $13 per square foot installed to budget for 24 gauge standing seam metal. The quote depends on the roof you have now and its shape. It also depends on the underlayment and the system you choose.
- One roofing square is 100 square feet of roof surface. At those rates, you can budget $18,700 to $22,100 for a 17 square roof.
- Apex Roofing Solutions Corp. lists wood replacement rates by the sheet or foot. You pay for the quantity actually replaced.
- For a home, Apex takes $500 when you sign. You pay 35% of the balance at permit approval. Another 35% is due after the inspection during installation passes. The final 30% is due after the final inspection passes.
What would a metal roof cost at 17 or 26 squares?
A 17 square roof comes to $18,700 to $22,100 for 24 gauge standing seam metal at the November 11, 2026 installed rate of $11 to $13 per square foot. At that same rate, a 26 square roof comes to $28,600 to $33,800. Use those examples to plan. The metal system in the proposal and the underlayment help determine your written price. The roof you have now and its shape matter too.
One roofing square is 100 square feet of roof surface. A 17 square roof has 1,700 square feet of roofing. So we multiply 1,700 by $11 to get the low end and by $13 to get the high end. A 26 square roof has 2,600 square feet. Once you know the area of your roof, you can use the same math.
Ask each contractor to show you the measured roof area on the estimate and point out which sections it covers. An attached garage or a covered porch can add roof area without adding living space. The slope matters too because the panels have to cover that sloped surface. If two bids show different roof areas, ask where the measurements differ before you try to compare the prices.
Why can two roofs with the same area cost different amounts in metal?
Two roofs with the same area can take different amounts of work. A valley is where two slopes meet and drain toward the same line. If your roof has several valleys, we have to cut and finish the panels along them. The covering we take off affects the quote. So does the standing seam system we put on. The underlayment beneath it matters too.
Underlayment is the layer between the metal panels and the roof deck, the wood surface the roof is built on. Ask each contractor to name the underlayment in their proposal. If one bid uses a different product, ask that roofer to show you what they priced and explain why they chose it for your house.
Ask how the contractor plans to finish the valleys and edges, especially where roof sections meet at different heights. Also ask what the removal section covers. If two contractors measured the same area and still came back with different prices, have each one show you the work and materials in their proposal that explain the difference. Start with the parts you can pick out in your inspection photos.
How close are tile and metal in price on the same roof?
As of November 11, 2026, concrete tile runs $9.75 to $11 per square foot installed. For 24 gauge standing seam metal, the range is $11 to $13. Architectural shingle runs $6 to $7.50 installed. The roof you have now and its shape affect all three ranges. So do the underlayment and the system you choose.
On the same 17 square roof, concrete tile comes to $16,575 to $18,700. Standing seam metal comes to $18,700 to $22,100. The architectural shingle example comes to $10,200 to $12,750. We use the same roof area in each example so you can compare the going rates. The written proposals for your house will reflect the products and removal work each option calls for.
If you're already looking at tile with an upgraded underlayment, ask for a standing seam price beside it. The ranges meet at $11 per square foot, so see what the two options actually cost on your house before you choose. If your priority is keeping the total down, ask whether architectural shingle is an option. Have the contractor price the same roof sections in each proposal so you can see what changing the material does to your budget.
How do you tell which metal roof the contractor priced?
Start by asking which 24 gauge standing seam system is in the bid. Gauge tells you how thick the metal is. Ask for the underlayment by name. Then ask for the Miami-Dade Notice of Acceptance, called an NOA. That document identifies an approved product or system. Have the contractor show you the approval for the system in the bid and explain how it applies to the roof they plan to install.
You should be able to follow the job in the proposal from the tear off to the finished roof. For an Apex residential replacement, we tear off the old roof down to the wood deck and install an NOA approved roof system. We name the underlayment. We handle the permit and both city inspections. We put the permit fees in the contract. When you're comparing proposals, check who handles those steps and where the fee is listed.
Ask for the warranty terms while you have the bids side by side. At Apex, we give you a 10-year workmanship warranty in writing, plus the manufacturer warranty where the system has one. The manufacturer warranty depends on installing the roof to the manufacturer's specifications. Check that the terms the contractor shows you cover the system named in your proposal.
Which charges can you know only after the metal roof job starts?
Taking off the old covering can uncover rotten wood. Apex puts the rates for rotten roof deck, fascia and soffit in the contract by the sheet or by the foot, as applicable. The final wood charge depends on how much actually gets replaced. Before you sign, ask which unit and rate apply to each item.
The deck is the wood under the roofing. Fascia is the board at the roof edge. Soffit is the underside of the overhang. Ask your contractor to point to those areas in the inspection photos so you know what each line in the contract refers to. The initial inspection can show visible concerns. Once the old covering comes off, the crew can see the deck underneath.
Look for the wood charges next to the written replacement scope and permit fees. Ask how the contractor will show you how much wood they replaced and where that quantity will appear on the bill. If the deck is priced by the sheet, you can check the charge against the actual sheet count. If fascia or soffit is priced by the foot, you can check the charge against the length replaced.
How much should I set aside for each payment during the metal roof job?
For a home, Apex takes a $500 deposit when you sign. You pay 35% of the remaining balance when the city approves the permit. You pay another 35% after the inspection during installation passes. The final 30% is due after the final city inspection passes. Subtract the deposit once before you use those percentages to figure out your payments.
Let's say you're using the $18,700 to $22,100 example for a 17 square roof and assuming no additional wood replacement. After the $500 deposit, you'd have $18,200 to $21,600 left. You'd pay $6,370 to $7,560 at permit approval. You'd pay the same amount after the inspection during installation. The final payment would be $5,460 to $6,480. Your written price depends on the roof you have now and its shape. It also depends on the underlayment and the system you choose.
The quote holds for 30 days. If you'd like to finance the work, Apex puts the monthly payment right beside the roof price on the quote. Keep the permit approval and the two inspection results with your proposal so you can check which payment is due when a request comes in. If you'd like the price and monthly payment for your house, call 305-290-2482 to book a free roof inspection.
What can an inspection tell me before I budget for metal?
The visit helps you figure out whether you need to budget for a replacement at all. We get on the roof and take photos of what we find. Then we show you what needs attention and what is cosmetic. If a repair makes sense given the roof's condition and remaining life, we'll quote the repair. If replacement makes sense, we can show you up to three options side by side.
If your insurer has raised a concern about the age of your roof, keep its written request handy. Ask the insurer what it needs from you and by when. We can show you the condition we see on the roof and explain the work we'd recommend. With both answers, you can decide how soon you need a written roofing price.
If you go ahead with a replacement, use the inspection to ask about what you see in the photos and check that the proposal covers those areas. Ask for the measured roof area on the proposal. Check that the same proposal names the exact metal system and shows the wood rates. Apex Roofing Solutions Corp. is based in Miami Lakes. We're licensed and insured, with Florida roofing license CCC1336242. If you'd like a written price for your home in Miami-Dade or Broward, book a free roof inspection.
Questions homeowners ask
Does the $11 to $13 range cover every kind of metal roof?
As of November 11, 2026, the $11 to $13 per square foot installed range is for 24 gauge standing seam metal. Ask the contractor to name the exact system before you compare a bid to that range. The system and the underlayment affect your written price. So do your roof shape and the covering you have now.
Can I use the square footage on my property record to estimate the total?
Use the measured roof area. Living area measures the floor and leaves out roof surfaces over spaces like an attached garage. Ask how many roofing squares the proposal covers. Each square is 100 square feet of roof surface.
Can Apex price metal and shingle for the same roof?
Yes. If the inspection points to replacement, Apex can show you up to three roof systems side by side, starting with the lowest priced option for your house. As of November 11, 2026, the installed planning range for architectural shingle is $6 to $7.50 per square foot. For 24 gauge standing seam metal, it's $11 to $13. The underlayment and the system affect each quote. So do the roof you have now and its shape.
How long does Apex hold the price on my metal roof quote?
Your written quote holds for 30 days. The contract lists the permit fees and the unit prices for rotten wood deck, fascia and soffit. What you pay for those wood items depends on how much actually needs to be replaced.
What do I pay Apex when I sign and when is the rest due?
For a residential roof replacement, you pay $500 when you sign. You pay 35% of the remaining balance when the city approves the permit. Another 35% is due after the city passes the inspection during installation. The last 30% is due after the city passes the final inspection. Financing is available, and you can see the monthly payment on the quote.
