A standing seam metal roof can be worth it in South Florida if your roof needs replacing and the written metal option fits your budget. Standing seam metal is Brandon Vega's own pick. At Apex Roofing Solutions Corp., we offer a free inspection, put every fee in writing and tie payments to permit approval and city inspections. However, that preference does not establish a payback period, guarantee resale value or make metal the right purchase when a repair would solve the problem.
Key takeaways
- Standing seam metal is Brandon Vega's personal pick, but Apex's inspection comes first to decide whether repair or replacement makes sense.
- Apex's November 11, 2026 installed going range for 24 gauge standing seam metal is $11 to $13 per square foot. The underlayment affects the price. So does the existing roof. The chosen system and complexity affect it too.
- Miami-Dade County Product Control approvals describe specific assemblies. The steel-deck documents linked here do not establish suitability for a wood-deck home.
- Apex collects $500 at signing, then 35%, 35% and 30% of the balance at permit approval and passed city inspections.
- Apex provides a written 10-year workmanship warranty. Manufacturer warranty terms depend on the selected system and installation to specification.
When does standing seam metal fit your budget?
If your roof needs replacing and you can afford the proposed installation, standing seam metal deserves a written comparison. It is Brandon's personal pick. However, that judgment should come after deciding whether you need a replacement at all. Choosing a new material does not tell you whether the roof you have can still be repaired.
At Apex Roofing Solutions Corp., we get on the roof and photograph what we find. We show you your own photos and explain what needs fixing and what is cosmetic. If a repair fixes the problem for less than the roof has left to give, we quote the repair. Otherwise, we quote replacement in up to three systems side by side.
Start with the money. Before you decide whether you like the material, you need to know the total commitment. Call 305-290-2482 to book a free roof inspection. We serve homeowners in Miami-Dade and Broward from Miami Lakes, and the inspection carries no obligation.
What does metal cost compared with shingle and tile?
As of November 11, 2026, Apex's going rates for 24 gauge standing seam metal are $11 to $13 per square foot installed. Architectural shingle is $6 to $7.50. Concrete tile is $9.75 to $11. These are comparison ranges. The underlayment moves the price. So does the existing roof. The chosen system and roof complexity affect it too.
Your starting point changes how those ranges look. There is a gap between the metal and shingle ranges. The tile and metal ranges meet at $11 per square foot. So metal is worth including when you are considering tile. However, that does not establish that the two written proposals for your house will have the same total.
Ask which underlayment is included. Underlayment is the material installed beneath the roof covering. Also ask which roof system the contractor is pricing. If the proposal only says metal, you do not have enough information to judge the purchase.
Our residential replacement includes full tear-off to the wood deck. We handle the permit and both city inspections. The contract lists the permit fees, and wood replacement has separate unit prices. Read those terms alongside the roof price. A published square-foot range is not your complete quote.
What do those ranges mean for a 20-square roof?
For an illustrative 20-square roof, Apex's published range for 24 gauge standing seam metal works out to $22,000 to $26,000. Architectural shingle works out to $12,000 to $15,000. Concrete tile works out to $19,500 to $22,000. One square means 100 square feet of roof, so this example uses 2,000 square feet of roof area.
These calculations use the November 11, 2026 installed going rates. They are not offers for a particular house. The underlayment and existing roof affect the job price. The selected system and roof complexity affect it too. Your inspection and written proposal establish what applies to your property.
Use your measured roof area, not your home's living area. Ask the roofer to put the roof measurement used in the proposal so you understand the calculation. Also keep the permit fees and possible wood replacement terms in front of you when reviewing your budget.
Let's say your written metal option fits comfortably, while another material leaves more room in your household budget. Either can be a reasonable decision. Ask yourself whether you want the exact metal installation being offered enough to pay its written price, without counting on an assumed future return.
What does a standing seam approval tell you?
A standing seam approval describes a particular assembly. It does not describe every roof sold under that material name. Miami-Dade County Product Control's Notices of Acceptance describe products with installation conditions and limitations. A Notice of Acceptance, or NOA, is an approval document you review against the proposed installation. It is not a county recommendation to buy metal.
The three Miami-Dade documents linked here concern standing seam steel panels over steel deck. Pay attention to that deck distinction. Apex's residential replacement offer describes tear-off to a wood deck, so these documents do not establish that the illustrated steel-deck assemblies fit your house.
Ask your contractor for the full approval that matches the proposed system and your actual deck. Have the contractor show you where that approval applies to your installation. Seeing a familiar product name on a brochure does not answer that question.
You do not need to choose the attachment details yourself. You do need a proposal that names what you are buying and a contractor who can explain the supporting documents. Keep the complete approval with your roof paperwork. The linked documents show why the details matter. They do not select a system for your home.
Which benefits should stay out of your payback calculation?
Leave any resale return or savings amount out of the calculation unless it has been established for your purchase. Brandon's personal preference for standing seam metal does not give you a dollar return. Apex's written replacement offer gives you a defined installation and warranty terms. It does not promise that a future buyer will repay your investment.
If insurance cost is part of your decision, ask your insurer what information it needs to evaluate the proposed roof. Do not build an assumed premium reduction into your budget. Get the insurer's answer before treating any potential change as money available for the purchase.
Also ask to see the actual warranty. A general description of metal roofs is not enough to make that decision. Apex provides a 10-year workmanship warranty in writing. A manufacturer warranty is included where the selected system has one, and it depends on installation to the manufacturer's specification.
Before signing, the practical value you can assess is the roof being proposed for your house. Read the installation scope first. Review the warranty next. Then decide whether the written price makes sense for you. A material preference can guide your questions, but you still need those documents.
Could the wood underneath change your decision?
Yes. Rotten wood deck, fascia or soffit can change what you pay, whichever roof covering you choose. Apex puts those costs in the contract per sheet or per foot and charges only for what is actually replaced. The amount of hidden damage cannot be promised before the old roof comes off.
The deck is the surface underneath the roof installation. Fascia is the board along the roof edge. Soffit is the surface beneath the overhang. These are separate from the metal covering you are choosing. Give their replacement terms attention before you commit your budget.
Now, I know the possibility of a growing bill is uncomfortable. What helps is knowing the unit prices in advance and understanding what work triggers them. With Apex, those terms are written before work begins. They are not introduced after tear-off.
Ask to see the wood pricing while you review the metal option. If your budget depends on there being no damaged wood, say so before signing. Your decision should account for the contract's conditions as well as the material you can see from the street.
What do you pay Apex at each stage?
For a residential replacement, Apex collects $500 at signing. You pay the remaining balance in stages: 35% when the city approves the permit, 35% after the in-progress inspection passes and 30% after the final inspection passes. Those percentages apply to the balance after the deposit. They are not three additional percentages of the original total.
We put that schedule in writing so you can see which stage each payment follows. The permit comes first. Installation follows on a firm date. The later payments follow passed city inspections. Those milestones let you plan the purchase without guessing when the next payment will be requested.
Financing is available, and the quote shows the monthly number. Read that amount alongside the written project price. The monthly payment helps you evaluate affordability. The proposal tells you exactly which roof you are purchasing.
A quoted price holds for 30 days. After signing, the city permit process takes about 2 to 4 weeks, followed by a firm installation date. Keep those timelines separate in your decision. The price-hold period describes the quote. The permit timeline describes the next step after signing.
What should you understand before choosing the metal roof?
Choose standing seam metal when you understand the proposed system, accept the written price and can meet the payment terms. The contractor should also explain why replacement makes sense for the roof you have. If those answers are still unclear, get a better explanation before signing.
Start with who is responsible for the work. Apex Roofing Solutions Corp. is licensed and insured, with Florida roofing license CCC1336242. Our residential replacement offer includes a named underlayment product and an NOA-approved system installed to Miami-Dade High Velocity Hurricane Zone code. Discuss that written scope along with the sample color.
Before installation, we cover the pool, windows and garage. We clean up every evening. Written warranties are delivered on completion. Those details help you evaluate how the project will be carried out alongside the material you are selecting.
Standing seam metal remains Brandon's pick, but the decision belongs to you. Call 305-290-2482 to book a free roof inspection. We will show you what your roof needs and put the available options in writing so you can decide whether metal is worth it for your home.
Questions homeowners ask
Does Brandon recommend standing seam metal for every house?
Standing seam metal is Brandon's personal pick, but at Apex, our recommendation starts with the roof inspection. If a repair fixes the problem for less than the roof has left to give, we quote the repair. When replacement makes sense, we show you up to three roof systems side by side, starting with the least expensive option.
Can I estimate the metal roof price from my home's living area?
Use the measured roof area instead. One roofing square means 100 square feet of roof, not 100 square feet of living space. For an illustrative 20-square roof, Apex's November 11, 2026 standing seam going rate of $11 to $13 per square foot installed gives a range of $22,000 to $26,000. The underlayment moves the price. So does the existing roof. The selected system and roof complexity affect it too. Wood replacement and permit fees need their own written terms.
Does a Miami-Dade approval mean any metal roof fits my home?
No. A Notice of Acceptance describes a particular product and assembly, with conditions and limitations. The Miami-Dade documents linked on this page concern standing seam panels over steel deck. They do not establish approval for installing those assemblies over your home's wood deck. Ask for the approval that matches the installation actually being proposed.
Does Apex promise that metal will pay for itself when I sell?
No resale return or payback period is part of Apex's residential replacement offer. Base your purchase decision on the written roof scope and a payment amount you can afford. Brandon's preference for standing seam metal is his judgment. It is not a promise about a future sale.
What does Apex charge, and when do I pay?
At Apex, we price each job after inspection. As of November 11, 2026, the going range for 24 gauge standing seam metal is $11 to $13 per square foot installed. The underlayment affects the final price. So does the existing roof. The selected system and complexity affect it too. You pay $500 at signing, then 35% of the balance at city permit approval, 35% after the in-progress inspection passes and 30% after the final inspection passes. Financing is available, with the monthly amount shown on the quote.
Sources
- Miami-Dade County Product Control: Atlantic Metal II standing seam steel panel assembly over steel deck
- Miami-Dade County Product Control: Southern Coast Enterprises standing seam steel panel assembly over steel deck
- Miami-Dade County Product Control: Roll Metal standing seam steel panel assembly over steel deck
