Roofing Guides

What should I check before signing a roofing contract in Florida?

Updated November 16, 2026 Reviewed by Brandon Vega, owner, Apex Roofing Solutions Corp. (license CCC1336242)
Apex Roofing Solutions crew installing underlayment over a bare wood roof deck during a roof replacement
Photo: Apex Roofing Solutions

At Apex, the first thing we tell homeowners to check is the exact roof system they are buying. Make sure the contract names the underlayment beneath the visible covering and the applicable product approval documents. A description such as “new tile roof” leaves too much unanswered about what will actually go on your house. That first check does not replace reading the payment terms, wood replacement charges and required contract notices. Apex Roofing Solutions Corp. offers a free inspection in Miami-Dade and Broward. We put the price in writing with every fee disclosed. Residential payments are tied to permit approval and passed city inspections.

Key takeaways

  • Apex Roofing Solutions Corp. recommends starting with the exact roof system. Check the named underlayment and applicable approval documents.
  • Apex starts residential replacement with $500 at signing, then collects 35%, 35% and 30% of the remaining balance at the written milestones.
  • Apex lists rotten wood deck replacement per sheet. Fascia and soffit replacement are listed per foot. We charge only for what is actually replaced.
  • Florida Statutes section 489.119 requires the contractor's registration or certification number on the contract.
  • Florida Statutes sections 489.1425 and 713.015 describe required notices for covered residential contracts above $2,500.

Does the contract tell me exactly which roof I am buying?

Start with what will actually go on your house. You should be able to point to the written description and explain it. Look at the roof covering first. Then identify the underlayment. Then check the applicable product approvals. At Apex, that complete description matters more than a broad label such as tile, metal or shingle.

Brandon Vega, who runs Apex, compares it to signing for a kitchen remodel without knowing which countertop you are getting. You know which room is being remodeled, but an important part of the purchase is still unsettled. A roofing contract that names only the visible covering leaves you with a similar question.

The roof system is the proposed combination of materials and how they will be installed together. Underlayment is the material beneath the visible roof covering. You are buying that part of the roof too, so it belongs in the written description even though you will not see it after the job is finished.

Before you sign, ask: “Can you show me the exact covering, the underlayment product and the approval documents for what you plan to install?” If you still only have a verbal explanation, request a revised contract or an attached specification. Keep the version you reviewed with your signed agreement.

What should the contract say beyond a promise to meet code?

Ask for the proposed materials by name and the approval documents that apply to them. “Installed to code” does not tell you which product you selected. Our advice is to get that conversation into a written description you can read before you commit to the work.

NOA means Notice of Acceptance, a Miami-Dade County product approval document. Ask for the applicable NOA, and have the contractor explain how it relates to your proposed roof. You do not need to become a roofing designer to ask where the written description and supporting documents are.

Keep those documents together. An unexplained approval number in a separate message does not give you that explanation. Ask the contractor to point out the proposed product and explain the installation described for your house. If the answer is unclear, ask for a plain explanation before you sign.

At Apex, residential replacements include full removal of the old roof down to the wood deck. They include a named underlayment product. They also include an NOA-approved system. We handle the permit and both city inspections. Those parts of our offer should be clear when you review the proposal, so you do not have to piece them together during installation.

What if the salesperson says we will choose the product later?

Ask to settle the product description before you sign. If a choice is still open, have the contractor explain exactly what is unresolved and how the final selection will be recorded. You should understand what your signature commits you to buying, including any attachments the agreement refers to.

For example, a proposal might name the roof covering but call the material beneath it only underlayment. That tells you the layer is included. It does not tell you which product you are buying. Ask for the manufacturer and product name to be added so the written scope matches the discussion.

Also ask how the contractor would present a proposed product substitution to you. Before agreeing to it, request an explanation of what would change in the scope. Ask what would change in the price. Ask what would change in the warranty. Settle that question while you can still review the proposal at the table.

Money is the first concern for many homeowners we speak with. It is hard to judge the total when part of what you are buying is still undefined. If you want help understanding an Apex proposal, book a free roof inspection or call 305-290-2482. We will show you your own roof photos and explain the recommended work.

Which costs can still be uncertain once the materials are named?

Hidden wood damage can stay uncertain until the old roof comes off. Naming the new roof system does not tell you every condition underneath the existing roof. Your contract should explain how those discoveries will be priced. That way, an unknown quantity does not also leave you with an unknown charge per sheet or foot.

At Apex, we price rotten wood deck replacement per sheet in the contract. We price fascia and soffit replacement per foot. Fascia is the board along the roof edge. Soffit is the surface beneath the roof overhang. We charge only for what is actually replaced.

Find those unit prices before you sign, and ask the contractor to explain the units. A price per sheet needs to identify what replacement work the charge covers. A price per foot needs to identify which part of the roof edge it applies to. Also ask how the amount replaced will be recorded for you to review.

A written price can still have an honest exception. At Apex, we write the fees and terms before work starts. The quantity of hidden damaged material depends on what we find. Ask to see the planned roof scope and the wood replacement terms before you decide whether the agreement is clear enough to sign.

When do I pay Apex the deposit and the remaining balance?

At Apex, residential roof replacement starts with a $500 deposit at signing. The remaining balance follows three written milestones: 35% when the city approves the permit, 35% after the in-progress inspection passes and 30% after the final inspection passes. Those percentages apply to the balance after the deposit.

Read what makes each payment due, along with the percentage. Permit approval is the first milestone after signing. The next payment follows the passed in-progress inspection. The last payment follows the passed final inspection. Ask where you will see the record that confirms each milestone.

We price your roof replacement after the inspection. Permit fees are listed in the contract, and the quoted price holds for 30 days. Financing is available with the monthly payment shown on the quote. Even when that monthly amount fits your household budget, read the job price and payment terms.

Our permit timeline is about 2 to 4 weeks after signing, followed by a firm installation date. Pool, windows and garage protection comes before installation work. Cleanup happens every evening. Ask for the sequence in writing so you know what happens after signing and when each payment becomes due.

Does Florida law cap every roofing deposit at 10%?

Florida Statutes section 489.126 does not set a blanket 10% deposit cap. It sets permit application and work start requirements when a contractor (licensed or not) receives an initial payment of more than 10% of the contract price for work on residential property. Read those conditions before treating that percentage as a deposit rule that applies to every contract.

Under the statute, the contractor generally must apply for necessary permits within 30 days after payment and start work within 90 days after all necessary permits are issued. There is an exception to the permit application requirement where applicable codes and ordinances do not require a permit.

The statute also allows for just cause and for the payer to agree in writing to longer periods. Those qualifications matter when you read the contract. If it has an extended schedule, read it carefully because the dates you accept in writing can affect how the provision applies.

Before deciding whether to sign, find the initial payment in the agreement. Check the permit application timing. Then read the work start terms. Ask the contractor to explain any longer period. Apex's $500 residential deposit and subsequent payment milestones are our written business terms, separate from the statute's threshold.

Which license details and notices should I review?

Check the contractor's license number and read the contract notices before you sign. Florida Statutes section 489.119(5)(b) requires a contractor's registration or certification number in contracts and proposals. Apex Roofing Solutions Corp. is licensed and insured, with Florida Certified Roofing Contractor license CCC1336242.

Do more than check that a number is printed. Ask the contractor to identify the business entering the agreement, then check the license associated with that business. Keep the company name and contact information with your contract so you know whom to contact about the work.

Florida Statutes section 489.1425 requires a written recovery fund statement in contracts to repair, restore, improve or build on residential property, except where all labor and materials do not exceed $2,500. That statement explains that limited recovery may be available for losses resulting from specified violations by a licensed contractor. It does not promise that every loss will be reimbursed.

Florida Statutes section 713.015 also requires a construction lien notice for covered direct contracts greater than $2,500 involving dwellings of up to four units, except when the owner is a contractor licensed under chapter 489 or a person who created parcels or offers parcels for sale or lease in the ordinary course of business. A construction lien is a legal right against the property for unpaid work or materials. The statutory notice explains that unpaid parties may seek payment against the property even after the owner has paid the contractor.

For covered contracts, the lien notice must appear in at least 12-point, capitalized, bold type on the front page or on a separate page signed and dated by the owner. The notice recommends contract terms requiring the contractor to give you, before each payment, a written lien release from anyone who has sent you a Notice to Owner. It also recommends consulting an attorney. Read the actual notice before treating it as routine paperwork.

What needs to be settled before I sign?

Settle the roof description first. Then make sure the money and warranty terms agree with it. You should know which system you selected and where the underlayment is named. You should also be able to find the fees and explain what makes each payment due.

Read the warranty itself, beyond its heading. At Apex, we provide a written 10-year workmanship warranty, plus a manufacturer warranty where the selected system has one. Manufacturer warranties hold only when the roof is installed to the manufacturer's specifications. Ask what each warranty covers, and keep the written terms.

Also make sure your roof actually needs the recommended replacement. At Apex, the on-roof inspection decides: if repair fixes the problem for less than the roof has left to give, we quote the repair. Otherwise, we present replacement options in up to three systems. The owner chooses the system.

Bring any unresolved questions back to the written proposal. A clear conversation helps, and the final agreement needs to reflect what you chose. Book a free roof inspection with Apex Roofing Solutions Corp. or call 305-290-2482. We serve Miami-Dade and Broward from Miami Lakes. We are happy to explain the work before you decide.

Questions homeowners ask

What does Apex recommend as the most important roofing contract detail before signing?

At Apex, we recommend starting with the exact roof system. Ask which manufacturer and product the covering will come from. Ask for the named underlayment. Then ask for the applicable product approval documents. Read those details in the contract or its attachments before you sign.

Should I accept a contract that only says the roof will meet code?

Ask the contractor to be more specific. Meeting code does not tell you which underlayment product you are buying or identify the proposed roof system. At Apex, we recommend putting those details in writing so you can understand the work and review any proposed substitution.

Does an approval number tell me everything about my roof?

No. A number alone does not explain how the contractor plans to install your roof. Ask the contractor to show how the approval applies to the proposed work on your house. Keep the complete document with your contract, and ask which installation details the contractor will use.

Can the final wood replacement amount be known before tear-off?

Some conditions stay hidden until the old roof comes off. At Apex, we write rotten wood deck replacement prices per sheet into the contract. We also write fascia and soffit prices per foot. The charge depends on what is actually replaced.

Are the workmanship and manufacturer warranties the same?

They are separate promises. At Apex, we provide a written 10-year workmanship warranty, plus a manufacturer warranty where the selected system has one. The manufacturer warranty's validity depends on installation to the manufacturer's specifications.

How much does Apex charge before the roof is finished?

Residential replacement starts with a $500 signing deposit. You pay the remaining balance in stages: 35% when the city approves the permit, 35% after the in-progress inspection passes and 30% after the final inspection passes. We price your job after the inspection. Financing is available with the monthly payment shown on the quote.

Sources

Free Estimate

Tell Us About Your Roof

Share a few details and our team will follow up with the next step.

  • Roof repairs, replacements, and inspections
  • Tile, shingle, metal, and commercial roofing
  • Serving Miami-Dade, Broward, Palm Beach and Monroe counties

Prefer to talk to a person?

Call now if you need help today.

305-290-2482