South Florida Roofing News

What do the 2026 Florida Building Code roofing changes mean for your Miami-Dade or Broward roof?

Updated November 15, 2026 Reviewed by Brandon Vega, owner, Apex Roofing Solutions Corp. (license CCC1336242)
Apex Roofing Solutions crew setting gray roof tiles over Polystick TU Plus underlayment
Photo: Apex Roofing Solutions

The 2026 Florida Building Code roofing changes take effect December 31, 2026. Miami-Dade Product Control's notices describe new tile underlayment approval requirements and new compliance options for shingle hips and ridges, with those requirements applying to permit applications submitted starting January 1, 2027. Confirm their application to your project with your city's building department, particularly for a Broward permit. However, the requirements depend on the roof assembly, so these notices do not mean every homeowner needs the same upgrade. At Apex Roofing Solutions Corp., we offer a free roof inspection. We put the price and every fee in writing. And our residential payments are tied to permit approval and city inspections.

Key takeaways

  • The Florida Building Commission lists December 31, 2026, as the 9th Edition's effective date.
  • Miami-Dade Product Control specifies January 1, 2027, permit applications for the tile underlayment and hip and ridge shingle requirements.
  • Miami-Dade's tile notice removes the yellow stripe prescriptive allowance and requires product approval with applicable uplift resistance.
  • Sections 1518.7.4.1 and 1518.7.4.2 provide the testing and prescribed attachment paths for hip and ridge shingles.
  • At Apex, our residential payments are $500 at signing. Then 35% of the balance is due at permit approval. Another 35% is due after the in-progress inspection passes, and 30% after the final inspection passes.

Which date matters if your roof replacement crosses into 2027?

The statewide effective date is December 31, 2026. For the tile underlayment and hip and ridge shingle changes, Miami-Dade Product Control specifically names permit applications submitted starting January 1, 2027. Those dates describe different things, so your contractor should confirm how your city's building department will process your application.

The Florida Building Commission's June 30 product approval presentation identifies the 8th Edition as the current code and the 9th Edition as effective December 31, 2026. Signing a contract does not answer the permit application question addressed in the county notices. Choosing an installation date does not answer it either.

Ask your roofer: Which code edition are you preparing this permit application under, and do the listed products meet it? Keep that answer with your proposal. At Apex, our residential permit process takes about 2 to 4 weeks after signing, followed by a firm installation date. That is an estimate for planning, not a promise that your application will fall before a particular deadline.

What changes underneath a new tile roof?

Tile underlayment, the material beneath the roof tiles, must have product approval under the new code, according to Miami-Dade Product Control's July 31 notice. The notice removes the previous allowance for prescriptive underlayments known as yellow stripe. It also requires documented resistance to wind uplift.

Wind uplift is the force pulling roofing upward. The county says tile underlayments must demonstrate resistance to the applicable component and cladding loads under ASCE 7 or Roofing Application Standard 127. For applications starting January 1, 2027, installation must follow the approved uses and applicable uplift resistance in the current product approval or NOA.

NOA means Notice of Acceptance, a Miami-Dade product approval document. The county says existing NOAs will remain valid and will not be withdrawn. However, that does not mean every use of an approved product is acceptable. The document must support the proposed installation and the uplift requirements for your roof.

Ask for the exact underlayment product and its approval document. Just asking whether the roofer uses approved materials does not get you that detail. Then ask the contractor to explain how its approved use fits your roof. At Apex, we name the underlayment product in our residential replacement scope so you can see what you are buying.

What changes at the top and corners of a shingle roof?

Miami-Dade Product Control's July 31 notice gives hip and ridge shingles two compliance paths: documented testing and classification, or the prescribed attachment method. Ridge shingles cover the roof's top intersection. Hip shingles cover the sloping intersections where roof planes meet.

Section 1518.7.4.1 requires testing and classification under UL 2375 modified to use a wind speed of 110 mph, with packaging labeled for compliance. That number describes the test for this component. It does not establish a wind rating for your entire roof.

Section 1518.7.4.2 gives the attachment alternative. It calls for two minimum 1-inch diameter spots of roof cement complying with ASTM D3019 or ASTM D4586, or other adhesive specified by the hip or ridge shingle manufacturer, on each side of the hip or ridge before each shingle is installed. The spots must be placed near the leading edge and fully covered by the exposed portion of the hip or ridge shingle. Fastening must follow the hip or ridge shingle manufacturer's instructions.

Your contractor needs to document and install this detail. Your part as the homeowner is to ask which compliance path appears in your permit documents. The county says asphalt shingle permit applications starting January 1, 2027, must comply through an NOA showing the new testing and classification or through the prescribed attachment method.

Does the steel deck testing notice affect your house?

The steel deck notice applies to roofing systems installed on lightweight concrete over steel decks. It does not describe every residential roof. Miami-Dade Product Control's January 15 memorandum requires these systems to demonstrate testing under TAS 114, Appendix J, for compliance with the 2026 code.

The county says relying solely on 2-foot by 2-foot uplift testing will no longer satisfy compliance for those assemblies. The notice also includes systems described as lightweight concrete and metal deck composites. Manufacturers must update the applicable NOA with supporting testing and documentation.

If your building has this construction, ask your contractor to identify the deck assembly and show the approval that supports it. For a commercial property, we inspect the roof and the building's needs, followed by a project-specific written scope and price. A residential tile underlayment notice cannot answer every question about a commercial roof assembly.

Can a statewide reroofing article tell you what may stay on your roof?

A statewide article cannot settle that question for your project by itself. The Florida Roofing and Sheet Metal Contractors Association's February explanation of Existing Building Section 706.3 includes an important exception: buildings in the High Velocity Hurricane Zone must comply with Building Sections 1512 through 1525.

The association labels these Existing Building Section 706.3 revisions as pending changes with an effective date of December 31, 2026. Its Exception 3 applies where two roof covering applications exist and the upper roof system or roof coverings are removed, or the upper roof system and original roof covering are removed, leaving an existing or repaired substrate adequate for installation of a new approved roof covering or roof system. A substrate is the surface supporting the new roofing. Its Exception 5 would allow an existing vapor barrier or self-adhering membrane adhered to the roof deck to remain if covered with an additional layer of membrane in accordance with Sections 1507 or R905. Those passages should not become a blanket promise that your contractor can leave old roofing in place.

Ask what will be removed and what, if anything, is proposed to remain. Then request the applicable approval and code basis for that scope. At Apex, our residential replacement offer includes a full tear-off to the wood deck. We inspect the exposed deck and charge for rotten wood replacement under the unit prices written in your contract.

How do you keep the code change from becoming an unexplained bill?

Start with a proposal that names the roof system and the exact underlayment. Ask for the Miami-Dade NOA. Then check the wood replacement prices and permit fees. A statement that the work will meet code gives you less to compare than a written description of what will actually be installed.

You want to know the total before the old roof comes off, and that money concern is understandable. At Apex, we write every price, fee and term before work starts. Rotten wood deck is priced per sheet in the contract. Fascia and soffit are priced per sheet or per foot as applicable, and you are charged only for what is actually replaced.

For a home, the deposit is $500 at signing. You then pay 35% of the balance when the city approves the permit. Another 35% is due after the in-progress inspection passes, and 30% after the final inspection passes. Financing is available, with the monthly number shown on your quote. A quoted price holds for 30 days.

The notices cited here do not establish a dollar increase for your roof. Your written scope should explain the products and work behind the price. At Apex, we include a 10-year workmanship warranty in writing, plus the manufacturer warranty where the system has one. Manufacturer warranties depend on installation to the manufacturer's specifications.

To book a free roof inspection with Apex Roofing Solutions Corp., call 305-290-2482. We get on the roof and show you your own photos so you can see what needs fixing and what is cosmetic. We are based in Miami Lakes and serve homeowners in Miami-Dade and Broward.

Questions homeowners ask

Does signing a roofing contract before December 31 settle which code applies?

The permit application date is what the Miami-Dade tile underlayment and hip and ridge shingle notices identify, not the date you sign the contract. Both notices specify applications starting January 1, 2027. Ask your contractor to confirm the applicable edition with your city's building department and identify it in the permit paperwork.

Will existing Miami-Dade tile underlayment and shingle NOAs be withdrawn because of these changes?

No. Miami-Dade Product Control says existing tile underlayment and shingle NOAs will not be withdrawn because of these changes. However, having an existing approval alone does not establish compliance with the new requirements. Its approved use and installation details still need to fit your project.

Does the 110 mph shingle test describe the wind rating of my whole roof?

No. The 110 mph figure in Section 1518.7.4.1 is the specified test speed for hip and ridge shingles under modified UL 2375. That is not a whole-roof hurricane performance promise.

Should I replace a roof just because the code is changing?

The date alone does not tell us whether replacement makes sense. At Apex, we get on the roof and show you your own photos. If a repair fixes the problem for less than the roof has left to give, we quote the repair. Otherwise, we quote replacement options.

What does Apex charge, and when do I pay?

At Apex, we price each residential replacement after an inspection. Going rates as of November 11, 2026, are $6 to $7.50 per square foot installed for architectural shingles. Concrete tile runs $9.75 to $11. For 24 gauge standing seam metal, the range is $11 to $13. These are ranges, not quotes; underlayment, the existing roof, the selected system and roof complexity affect the price. You pay $500 at signing. Then you pay 35% of the balance at permit approval. Another 35% is due after the in-progress inspection passes, and 30% after the final inspection passes. Financing is available with the monthly payment shown on the quote.

Sources

Free Estimate

Tell Us About Your Roof

Share a few details and our team will follow up with the next step.

  • Roof repairs, replacements, and inspections
  • Tile, shingle, metal, and commercial roofing
  • Serving Miami-Dade, Broward, Palm Beach and Monroe counties

Prefer to talk to a person?

Call now if you need help today.

305-290-2482